STORE HOURS
9 TO 6 CDT
GMT minus 5 hours
Monday thru Friday
Do not call on
Sat. Sun. please

 

 

 Benches by--
       Paul L. Jansen and Son

The World's Premium Piano Bench Makers

 

Message from Keith
     You will get the best service and support
     right here-- AND, at the best price.

PLEASE ALLOW US TO SELL YOU BENCH REPAIR PARTS
The parts here are ONLY for use with Jansen Piano Benches.
Let's talk: (800) 338-8863


Did you ever
call
on Wednesday,
and we did not
answer the
phone?
Come out to
Roane County
Park on the
Tennessee River,
and we will take
your order there.

:-)

Others web merchants brag that they will beat any price from another
Jansen bench seller. Not so. We will beat them all and
always have. We sell ONLY Jansen's benches.
All other products are inferior.

 

IF YOU ALREADY HAVE A JANSEN BENCH--
CONSIDER RESTORING IT YOURSELF:

PARTS LIST OF ITEMS FOR RESTORING A JANSEN BENCH YOURSELF?

The following parts are original production items from Jansen. These parts will help you to bring your
old Jansen bench back to near-new condition. The work requires only normal mechanical ability. We
are the only ones worldwide making this available to our customers. Perhaps you don't need a new bench--
Perhaps you could keep the old one in use by restoring it.

Suggestions for changing moving parts:

1. Buy a tube of LockTite at the hardware store. Make sure is is REMOVABLE LockTite so that you
can remove the parts later to service the bench. Apply the LockTite ONLY to the threads of the bolts
as you assemble them. This sill prevent the bolt from loosening and damaging the threads. Be sure the
threads of the bolts etc are bone dry when you apply the LockTite. Add grease carefully to only the
moving or bearing points.
2. While at the hardware store, buy a metal handle soldering flux brush. They are cheap. Use this to apply
a very modest amount of grease (not oil) to the moving parts bearing points as you assembly the new parts.
Any grease will be fine, but white lithium grease will not stain as badly if you happen to get too much and
it drips on the floor.

One set of bushings to restore the mechanism (Fits all past models) - - - - - - - -
This is often all that is needed to make the mechanism work smoothly again.
$   30.00
Bench repair kit (shoulder bolts, bushings & set screws) $   50.00
New top wood frame apron - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $ 150.00
Rebuilt upholstered top and mechanism
Standard Artist Bench - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Duet Artist Bench
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

You only remove the legs from your bench top and send it in insured to the Jansens after making payment arrangements with us. The Jansens then remove the old upholstering, including the foam, and replace it with new materials which duplicate your original bench. The scissor mechanism is also reconditioned and new bushing installed. So, DO NOT remove the metal parts and mechanism from the bench top, ONLY the legs. Pack in a sturdy carton.


$ 395.00 vinyl
$ 495.00 vinyl
leather extra
call for price



Tubes for Mechanism - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $   42.00
New legs for artist bench-- J1 &J2- (for extra length legs add $50)- - - - - - - - - - - - $  135.00
New legs for artist bench--J3 & J4-(for extra length legs add $50)- - - - - - - - - - - - $ 117.00
Set of 4 New Legs for an Artist Bench-- Other styles - - - - - - - - - - - - - - - - - - - - - -
Inquire
New legs for Conventional Upright and Grand benches - - - - - - - - - - - - - - - - - - -
Inquire
Conventional Bench box and top complete without legs - - - - - - - - - - - - - - - - - -
$ 175.00 *
Nickel Bench Ferrules-- Set of four - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $   100.00
Brass Bench Ferrules-- Set of four - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $   67.00
Shoulder Bolts to hold the height adjustment mechanism to the bench - - - - - - $     9.00 ea.
Buttons with spike design for diamond tufting-- vinyl only-- 10 with washers - -$   12.50
Adjusting Knob - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $   33.00
New Wood Rim and Foam for top of an Artist Bench for do-it-yourselfer
(NOT upholstered, no legs, not stained, no metal hardware)
$ 144.00
New Claw feet for a Round Top Stool- NOT glass ball, all gray iron cast "gold"
Length 4 inches, opening 1-1/16 inch, 2 mounting holes in side - - - - - - - - - - - - -

$
   19.00 ea.

* There is absolutely NO RETURN of this bench if you do anything to retro fit or use it and change your mind.

We can also supply Grand Piano Legs, Lyres, Pedals, and Desks

See our instructions on cabinet restoration to bring back the wood finish.
Also, we will rebuild your old bench for a price. Send Mail

 

 

SHIPPING POLICY WITH JANSEN'S MERCHANDISE:

Jansen has agreed to "Drop Ship" to our customers in the USA.  
That means the merchandise will be shipped directly
from Jansen's Factory to YOU without coming through our office.
Your product will arrive sooner this way.

CHECKING ON YOUR ORDER

Call us for all follow up questions concerning your order.
Please DO NOT call Jansen to check on orders.
They do NO retail business,
and they have no records of details concerning your order.
When people violate this, the Jansens often actually make
the situation worse since they are interrupted from normal
production in order to talk to you. You will not be pleased doing this.

RETURNS:

Please don't just order a bench to have a look.  
Check it out FIRST. Send E-Mail-- ask questions.
You may want to visit a show room in your area and look at a bench.
CALL: (800) 338-8863 and let's talk about your needs!

On all Jansen products....
We reserve the right to charge a 20% restocking fee at our discretion.
All returns of Jansen products must be returned to them.
NEVER return merchandise without calling us at (800) 338-8863 to make arrangements.
You may own the product and never see it again. Let's do it right!

If a bench or product is returned damaged, Jansen will have the last word
as to further charges to you which will be deducted from any credit back to you.
This may be over and above the restocking fee.
RETURN ALL BENCHES IN THE CARTON IN WHICH THEY CAME TO YOU.
Be sure to insure all returns for the original cost of the item.
If a bench of product arrives damaged in shipping, DO NOT even
remove it from the carton-- call us, and we call Jansen, and Jansen
arranges for UPS to come and examine the damage and return the item.
If you proceed to open a damaged carton and assemble the bench
and / or discard the carton, you will have to accept the product damaged.

Thanks for understanding. If these policies seem ominous, please consider this--
We tell you up front what other firms spring on you LATER. We hope this is helpful.

ORDER NOW:

ORDER BY PHONE WITH CREDIT CARD
CALL TOLL FREE: (800) 338-8863
If there is no answer, please leave a message- we do answer our voicemail

OR:
Go to Mail Order Form for printing and Ordering by Mail:

For Technical support CALL: (520) 456-2338

 

 

Online help available

BACK TO PIANO TITLE PAGE