9 TO 6 CDT
GMT minus 5 hours
Monday thru Friday
Do not call on
Sat. Sun. please
GRAND PIANO HARDWARE
instructions at the bottom of this page
EXHAUSTIVE WORD INDEX OF THE WHOLE SITE:
You MUST browse the Catalog area, and try to learn what you want. We no longer search our catalog for you.
this information ready:
If you are confused, call us for assistance.
If we do not answer the phone, we are probably here-- Just leave a message- we will
return your call (it may not be the same day).
PIANO HARDWARE ON THIS PAGE--
Some Upright Part Hinges and action mounting hardware for
upright pianos are found under other links listed on this page.
ELSEWHERE IN THE CATALOG:
GRAND AND UPRIGHT PIANO DESKS
GRAND PIANO PEDAL HARDWARE
GRAND PIANO DESK HARDWARE
UPRIGHT PIANO DESK HARDWARE
Part Description Part Number Price
Grand Keyboard Spring-- Key cover
comes to rest on this. Old No. 30549 SH959 $ 27.00
Grand Action Shift Springs-- Returns
key action frame after using quiet pedal.
Blued Steel- 16 gage steel
Length Width Old No.
8 7/16" 1 3/4 " 30550A SH962 $ 17.50
Fallboard (key lid) Hinges--
The only grand fallboard hinges we can get at present
are about 1" square. Call for info and price.
Grand Desk Brass Slides--
Desk slides on these- Pair
Can be used to replace wooden slides.
14 inch (Old Part #- 30556) SH1072 $ 43.75
Grand lid support, (old part 30557)
Solid brass- Hinged-
Short arm 2", long arm 12"- SH935 $ 29.60
Same as above but nickel SH936 $35.00
Leg Ferrules-- These are much more substantial than the ferrules elsewhere
on this page.
Solid cast brass-- For nickel plated sockets, order these and send them off to be plated.
Inside Dimension Height Metal Old Part No. Ordering No. Price
1 1/2" 5/8" Polished Finish Graphic No. 30560A SH964A $ 36.50 each
1 3/4" 1 1/2" Polished Finish Graphic No. 30561A SH964B $ 40.00 each
2" 2" Polished Finish Graphic No. 30562A SH964C $ 65.00 each
Grand Desk Rest--
Solid Brass--- 7 1/8 inch from knuckle to end
Complete with staple, rubber cap, and screws.
Satin Brass Finish Old Part Number 30565 SH941 $ 79.50
Polished Nickel Old Part Number 30566 SH942 $ 79.50
Rubber caps only (Cover parts) Old Part Number 30567A SH941C $ 2.00
Desk Support Hinge-- Solid brass four flap hinge. In graphic, see 30568-69-70
For desk that fold either forward of backward. Furnished with screws.
1 inch wide by 9 inch long- Satin Finish SH940N $ 82.50
Desk Butt (Flap) Hinges-- 1-3/4" by 1"
Brass SH567B $ 11.25 each
Nickel SH567N $ 13.00 each
Grand Quiet Pedal Lever--
This lever is underneath the piano and activates the keybed when the pedal is used.
You may have to do some improvising to make it fit perfect. Old Part No. in graphic 30547 SH1074 $ 30.25
Steinway Sostenuto Pedal String SH961 $ 23.00
Part Description Part Number Price
Grand Action Brackets-- Cast iron with screws-- Needed if one breaks
Be sure the bracket in the picture is the same as yours.
If the new brackets are shorter than yours, add shims of maple wood
under the feet to lift the bracket into proper relationship with the rest of
the action. Also, the hammer rail may need to be remade or shimmed
to level the hammers with the action. Regulation will add the final touch.
Aeolian-American No. 108 Type
See 30546 in the above graphic SH1076 $ 18.55 ea
Full set of three or four of either style $ 14.00 ea
Grand Piano Lock--
Complete with plunger, escutcheon,
(That's the little key lock diddly) and key.
Satin brass finish--
Selvage plate 5/8" by 4 1/16"
Square ends to plate.
Key alone fits many grand locks
Grand lock with SQUARE end plates SH965 $ 110.25
Escutcheon only SH965E $ 3.00
Key only for grand locks SH965K $ 14.00
Grand lock with ROUND end plates Not available
Mason and Hamlin Style Desk Hinge
See Part Number 301078 in the graphic SH1095 $14.00 each
piano fall board lock key-- Steinway
Solid brass with lyre design for Steinway grands before 1971 SH965KS $ 58.00
Grand Leg Plates-- Cast iron, Set of
3 units (legs) -- Two interlocking plates to each unit.
Round-- 4 3/8 inch diameter SH966 $ 97.50
Some high quality uprights also had grand piano type agraffes. Go to the Restringing Page for agraffes and tools for them.
See our Instructions on Agraffe Repair
Grand Hammer Rail
Prop-- Support piece in nearly all grand actions--
2 3/4 inch length; set of 5 parts, nuts included Old Part Number 30580B SH1027 $ 22.50
Grand Hammer Rail Slotted Prop Nuts- See in graphic above at top right SH925 $ 1.00 ea.
Lid Support Cups-- Receive the top end of the lid prop
Brass Finish-- Old Part Number 30586 SH938B $ 9.50
Nickel Finish-- 30586N SH938N $ 14.00
ORDER BY PHONE WITH CREDIT CARD
CALL TOLL FREE: (800) 338-8863
If there is no answer, please leave a message- we do answer our voicemail
Go to Mail Order Form for printing:
BACK TO PIANO TITLE PAGE