| STORE
HOURS 9 TO 6 CDT GMT minus 5 hours Monday thru Friday Do not call on Sat. Sun. please |
PIANO BENCH HARDWARE
| ORDERING INFORMATION: MINIMUM
ORDER: SHIPPING
POLICY: You MUST browse the Catalog area, and try to learn what you want. We no longer search our catalog for you. Have
this information ready: Make
sure you are in the catalog area for your kind of piano-- If you are confused, do not phone us until you have SENT E-MAIL and asked for help. If we do not answer the phone, we are probably here-- Just leave a message- we will
return your call (it may not be the same day). |
CLICK AT LEFT
TO ENTER OUR BOOK STORE
We now offer you a bookstore of music from
Bach to Piano to Zither. Do drop in. When you buy from the Book Store, you are
buying from Amazon.com, and we get a commission. You pay no more than if you ordered
directly from Amazon.com, and you get very fast service.
EXHAUSTIVE WORD INDEX OF THE WHOLE SITE:
SMALL CABINET PARTS-- RUBBER, BRASS, WOOD, AND METAL
CLICK HERE to go to Grand and Upright Piano Desks.
CLICK HERE to go to Grand Piano pedal hardware.
PEDAL HARDWARE-- Including springs for pedal trap mechanisms
Learn how to repair your bench from my online Repair Section.
Part Description Part Number Price
Steel
Bench Corner Brackets
3-1/8" by 2-1/2"
Old Part Number 301061
SH577
$ 3.25 each np
Lid Support--
Steel-- Brass Plated-- Locks open
Old Part Number 301063A SH576
$ 4.00 np
Lid Support--
Steel-- Brass Plated-- Anchor included
This support
has a curved follower which allows
more shallow
mounting. The anchor includes and
adjustable friction
nylon brake feature. This brake
holds the lid
open while you remove books from
the bench and
saves your fingers. L-brnR1086 $
8.00 np
Piano Bench Hinges-- Steel--
Brass plated-- Pair
Length
along pin Width open
1 1/4 inch 1 1/8 inch Old
Part Number 301062A
SH575
$ 3.25 np
1 1/4 inch
1 3/4 inch Old Part Number 301062A
SH575A
$ 3.25 np
Hanger Bolts-- Includes lock
washer and nut of your choice--
Use these with
corner plate 301061
Square nut assembly
5/16 inch by 2 inch
Old Part Number 301064A
SH1081A
$ 4.00 np
5/16 inch by 2 1/2 inch Old Part Number 301064B
SH1081B
$ 4.15 np
Leg Ferrules--
Brass-- Satin finished and lacquered-- Use on Piano and bench
legs.
Inside Diameter- 1-1/8" --
Hieght- 1-1/8 "
SH677
$ 5.85 each np
We no longer carry round ferrules
Bench Glides
Plastic
Nail Glide-- Tap into bottom end of bench leg to prevent damage to floor.
5/8 inch diameter
Old Part Number 3016655A
SH1085A
$ 1.50 each np
3/4 inch diameter Old
Part Number 3016655B
SH1085B
$ 1.50 each np
Round Top Stool Replacement
Hardware
This mechanism includes the
two square plates, with four holes, which attach to the
top of the stool and the base of the stool, with one plate
attached to a screw.
The whole mechanism must
be purchased since the screw is not the same as
original hardware. The screw is larger in diameter, and the hole in
the top of the
base of the stool may need to
be slightly enlarged.
THIS IS NOT AN
ORIGINAL ANCIENT PART--
IT IS A MODERN REPLACEMENT.
If antique value is the issue, you will
find NO ONE? in the world who carries the
frail smaller original parts. They break too easily. This is a case
when newer is better. SH5000
$ 78.00 np
ORDER BY PHONE WITH CREDIT CARD
CALL
TOLL FREE: (800) 338-8863
If there is no answer, please leave
a message- we do answer our voicemail
OR:
Go to Mail Order Form for printing:
Online
help available 
NP
